38
H
OME
/O
FFICE
M
ODEM
MNP Operation
The H
OME
/O
FFICE
M
ODEM
supports all of the preceding classes.
The following AT Commands apply to the MNP protocol.
Default values are highlighted.
Maximum MNP Block Size
. Use this command to transmit
smaller blocks of data in a reliable data link connection.
AT\A0
set maximum block size to 64 characters.
AT\A1
set maximum block size to 128 characters.
(DEFAULT)
AT\A2
set maximum block size to 192 characters.
AT\A3
set maximum block size to 256 characters.
Transmit Break
.
When this command is entered during a non-
MNP connection, a break signal is sent to the remote modem.
The length of the break is 100 times the n parameter (1-9) in
milliseconds. The default is 3.
AT\B3
(DEFAULT)
Modem to Modem Flow Control
. Enables or disables modem
to modem flow control during a normal mode connection. This
command is ignored when error correction is selected.
AT\G0
Disables flow control (XON/XOFF) (DEFAULT)
AT\G1
Enables flow control (XON/XOFF)
HOMEOFF.PM6
5/9/97, 9:15 AM
38
Summary of Contents for HOME OFFICE
Page 1: ...1 HOME OFFICE MODEM 33 6 Internal External Fax Modem Advanced User s Guide...
Page 2: ...2 HOME OFFICE MODEM...
Page 69: ...69...
Page 70: ...Manual Part No 9378 Rev 1 0...
