Boca HOME OFFICE, User Manual

Page: 35 / 70

35
Extended AT Commands
Command Description
Data carrier detect (DCD) signal
AT&C0 Forces DCD signal to be on at all times. (default)
AT&C1 DCD on indicates presence of data carrier.
Data terminal ready (DTR) signal . Interprets the ON to OFF
transition of the DTR signal from the DTE according to the &Q
settings.
AT&D0 &Q0,5,6. DTR ignored.
&Q1,4. Modem hangs up; auto answer not affected.
&Q2,3. Modem hangs up; auto answer inhibited.
(default)
AT&D1 &Q0,1,4-6. Asynchronous escape sequence.
&Q2,3. Modem hangs up; auto answer inhibited.
AT&D2 &Q0-6. Modem hangs up; auto answer inhibited.
AT&D3 &Q0,1,4-6. Modem does a soft reset as if the ATZ
command were received;
&Q2,3. Modem hangs up; auto answer inhibited.
AT&F Recalls factory defaults. Instructs the modem to use
the factory set parameters.
DTE/Modem flow control
AT&K0 Disable flow control.
AT&K3 Enable RTS/CTS (default for data mode)
AT&K4 Enable XON/XOFF.
AT&K5 Enable transparent XON/XOFF.
AT&K6 Enable both RTS/CTS and XON/XOFF
(default for FAX mode)
Modem Command Reference
HOMEOFF.PM6 5/9/97, 9:15 AM 35