background image

9

Section One: Introduction

The BOCALANcard 2000 Plus products allow you to connect the
IBM personal computer ISA-bus (or compatible) to an Ethernet
network. The BEN400IT adapter provides an RJ45 for connecting
to an unshielded twisted-pair network (10Base-T). The BEN400I2
adapter provides a 10Base-T connector plus a 10Base2 BNC
connector to attach to thin coax.

Features of the BOCALANcard 2000 Plus:

• Compliant with ISO/ANSI IEEE 802.3 specifications
• High-performance, highly integrated one-chip solution
• On-board support for connecting to a 10Base-T network

(BEN400IT) or 10Base2 (BEN400I2).

• Designed to work with 286, 386, 486, and Pentium-based

systems.

• Plug and Play compatible (ISA Plug and Play, v. 1.0a)
• Full-duplex capability
• Jumperless adapter—all features such as interrupt channel and

I/O address are software-selectable.

• Easy installation and maintenance.
• Uses existing NE2000 drivers—no need to install new drivers.
• Low-cost solution for networks requiring 10Base-T or 10Base2

connection.

• One link/receive (GREEN) status LED indicator and one

transmit (RED) status LED indicator.

• NE2000/ compatible.

Introduction

Summary of Contents for BEN400I2









































Reviews: