7
Quick Start (for Experienced Users)
This section is intended for knowledgeable and experienced
network installers.
Other Items You May Need to Complete the Installation:
• Suitable tools to install the BOCALANcard 2000 Plus in your
computer.
• Some network operating systems require some of their original
installation diskettes. See your network installation manuals.
Hardware Installation
• On Plug and Play Systems:
Simply install the board into a 16-bit slot and it will automatically
configure.
• On Non Plug and Play Systems:
1. Install the board into a 16-bit slot and run BENCFG.
2. Set the board to “jumperless” mode with BENCFG.
3. Set the desired I/O port and IRQ settings.
If you need to change any of the default settings, refer to Section
Two for instructions.
Quickstart
