19
LAN CARD Enabler
Copyright (c) 1994-1995
All Rights Reserved
The card is now configured and should be ready to load the
network drivers. Continue with the appropriate section for
configuring your network operating system with the BEN1PA/
BEN2PA drivers.
Novell NetWare Drivers
Novell NetWare driver support includes:
• DOS ODI Client Drivers for Novell NetWare 3.11 through 4.02.
A NET.CFG file is needed to establish defaults for the Boca
PCMCIA card. An MLID section must exist in the NET.CFG if
your network has more than one adapter.
NOTE: The ODI driver always checks the parameters of the NET.CFG
first. If the related adapter’s configuration parameters are found, they
will be recognized as the “preferred setting” even though it conflicts
with parameters stored in the EEPROM adapter. Thus, it will fail to
initialize the adapter. The following is an example of a NET.CFG file
:
Link Driver PMXMLID
Frame Ethernet_802.3
Frame Ethernet_II
Frame Ethernet_802.2
Frame Ethernet_Snap
INT 5
PORT 320
Installation and Configuration
Your port and interrupt
address should be the
same as the ones
assigned by NETOPEN.
