14
BOCALANcard-PC
Section Two: Installation and Configuration
The BOCALANcard-PC is compatible with IEEE Ethernet
standards. Most notebook and laptop computers supporting the
PCMCIA Type II slot specification have a small covered opening
for the slot. Refer to the illustrations on pages 8-9.
STEP 1: Insert the Card
Open the cover to expose this slot. If you require assistance, refer
to your computer documentation. Slide the card in gently but
firmly
into the slot until it is fully inserted.
STEP 2: Make Network Connections
1. If you are using the supplied RJ-45 only cable (BEN1PA), then
you are connecting to a 10Base-T network only. Attach the
special plug end of the supplied RJ-45 cable to the Boca card.
Connect the other end (female) to a standard RJ-45 cable. Then,
attach the other end to a 10Base-T concentrator or hub.
2. If you are using the supplied dual-purpose RJ-45/BNC cable
(BEN2PA)
, then you are connecting to a 10Base-T OR 10Base2
network (but not both).
a. If 10Base-T, attach the special plug end of the supplied dual-
purpose cable to the Boca card. Then, attach the remaining
end to a standard RJ-45 cable. Attach the other end of the
standard cable to a 10Base-T concentrator or hub.
