5
CAUTION:
READ ALL WARNINGS BEFORE USING OR ATTEMPTING ANY WORK ON
YOUR MARKER. SHOULD YOU BE UNSURE AT ANY POINT, STOP AND SEEK
PROFESSIONAL SUPPORT.
Trigger Adjustment and Maintenance
The G6R comes with a roller bearing trigger which you can adjust for the feel which is most
comfortable with your style of play. To simplify maintenance the trigger can be removed from the
marker without requiring the removal of the grip frame.
1.
The G6R has two adjustment screws.
The bottom screw is for trigger post-
travel and the top screw adjusts the
activation point (where the marker
fires). To adjust the screws insert a
hex key and turn the screw. The
screws have Loctite to prevent the
adjustment from slipping so a firm,
steady pressure is needed for the
initial adjustment.
2.
To remove the trigger begin by
removing the trigger pivot pin
3.
If the trigger spring encounters
resistance when partially removed it
may be catching on the micro switch
of the control board. Simply push up
on the spring with a hex key and it
will slide free.
4.
Use swabs dipped in alcohol to clean
any residual paint or grime from the
trigger area. If necessary open the
grip panels and clean inside the frame
as well.
5.
When reinstalling the trigger press up
on the spring slightly to prevent
snagging the microswitch.
1
2
3
