Keyword
Parameter
Description
Release
:MODE
ZIF | DD | HDR
| IQIN | SH |
SHN | HIF
Selects the receiver mode of operation.
See the complete command description section
for special notes.
v3.0
– ZIF
v3.1
– HDR
v3.2
– SH
v3.2.1
– IQIN,
SHN
v3.2.2
– DD
v3.5.0
– HIF
:MODE?
:OUTput
Page
67
:IQ
:MODE
CONNector | DIGitizer
Selects the IQ output path type
v3.1
:MODE?
:CONNector
:INVersion?
[NRf [unit]]
Query if spectral inversion is required at the
given frequency
v4.1.0
[:SENSe]
Page
63
:CORRection
:DCOFfset
ON | OFF | 1 | 0
Enables/disables the wideband ADC's DC-offset
correction
TBD
:DCOFfset?
:DECimation
OFF | <integer>
Sets the decimation rate as an exponent of 2 (i.e.
rate = 2
level
where level = 0,
1,
2 - 10)
v3.0
:DECimation?
[MAX | MIN]
:FREQuency
:CENTer
<NRf [unit]>
Sets the center frequency of the RFE
v3.0
:CENTer?
[MAX | MIN]
:IF?
<non-zero integer>
Queries the IF frequencies that are used for the
current input mode and center frequency
v4.3.2
:LOSCillator?
<1 | 2>
Gets the frequency to be set for the external LO
1 or 2 in corresponding to current the RTSA
7500's center frequency
v3.2.1
:SHIFt
<NRf [unit]>
Sets the frequency shift value (not available for
HDR mode)
v3.1
:SHIFt?
[MAX | MIN]
v3.1
:RESolution?
Gets the Analog PLL tuning resolution
TBD
:INVersion?
<NRf [unit]>
Query if a spectral inversion is required at the
given frequency
v3.2.3
v4.1.0 -
Deprecated
:LOCK
:REFerence?
Queries the lock status of the PLL reference
clock
v3.0
:RF?
Queries the lock status of the RFE's RF PLL
v3.0
:SOURce
Page
63
:REFerence
:PLL
INT | EXT
Selects the 10MHz reference clock source
v3.0
:PLL?
:RESET
Resets the 10MHz reference selection to
INTernal source
v3.0
:STATus
Page
56
