BMW Z4 sDrive28i Owner'S Manual Download

Page: 61 / 220

Tachometer

Never force the engine speed up into the red
warning field, see arrow. In this range, the fuel
supply is interrupted to protect the engine.

Coolant temperature

A warning lamp will come on if the coolant, and
therefore the engine, becomes too hot.
Check the coolant level, refer to page

167

Engine oil temperature

▷

Cold engine: the pointer is at the low tem‐
perature end. Drive at moderate engine and
vehicle speeds.

▷

Normal operating temperature: the pointer
is in the middle of the temperature display.

▷

Hot engine: the pointer is at the high tem‐
perature end. Switch off the engine imme‐
diately and allow it to cool down.

If the engine oil temperature is too high, a warn‐
ing lamp comes on in the instrument cluster.

Check the oil level, refer to page

164

Fuel gauge

The vehicle inclination may cause the display to
vary.
Notes on refueling, refer to page

152

Range

After the reserve range is reached:

▷

An indicator lamp is briefly displayed.

Seite 61

Displays

Controls

Online Edition for Part no. 01 40 2 609 184 - 09 11 500

Summary of Contents for Z4 sDrive28i





























































































































































































































Search results

Summary of Contents for Z4 sDrive28i

Reviews:

Related manuals for Z4 sDrive28i

Brands by name

Popular brands

BMW Z4 sDrive28i, Owner'S Manual

Search results

Summary of Contents for Z4 sDrive28i

Reviews:

Related manuals for Z4 sDrive28i

Brands by name

Popular brands