BMW X5 - CATALOGUE Owner'S Manual Download Page 245

Page: 245 / 440

▷

Cameras behind the windshield.

▷

Front radar sensor.

▷

Radar sensors, side, front.

▷

Radar sensors, side, rear.

Additional information:
Sensors of the vehicle, refer to page

Functional requirements

▷

Speed below 130 mph/210 km/h.

▷

Sufficient lane width.

▷

Above approx. 43 mph, 70 km/h: lane mark‐
ing on both sides is detected.

▷

Below approx. 43 mph, 70 km/h: lane marking
on both sides or a vehicle driving ahead is de‐
tected.

▷

Hands on the steering wheel rim.

▷

Wide curves.

▷

Drive in the center of the lane.

▷

Turn signal switched off.

▷

The sensor system calibration process is
complete.

▷

Cruise control with distance control active.

▷

Safety belt on the driver's side fastened.

▷

Forward Collision Warning active.

▷

Pedestrian Warning active.

▷

Side Collision Warning active.

Turning on/off

Assisted Driving Mode

General information

This button is used to switch the config‐
ured function on and off.

The button can be used to set the pri‐
marily used function.

Set function

When the system is active, press the
button repeatedly until the desired func‐

tion is selected in the toolbar. The toolbar for As‐
sisted Driving mode is displayed at the bottom of
the instrument cluster.

Icon

Function

Cruise control with distance control.

Depending on the equipment version,
cruise control with distance control and
steering and traffic jam assistant.

The selected function is shown in green.

Turning on

Press the button on the steering

wheel.

Adjust the steering and traffic jam

assistant if necessary.

Steering wheel symbol lights up gray.
The system is on standby and does not
manipulate steering.

System activates automatically as soon as all
function conditions are fulfilled.

Steering wheel symbol lights up green.
The system is active.

With the system switched on, the Pedestrian
Warning with City Collision Mitigation and the
side collision mitigation are active.

Turning off

Press the button on the steering wheel.

The indicator goes out.

Seite 245

Driver assistance systems

CONTROLS

245

Online Edition for Part no. 01405A37D22 - VI/21

Summary of Contents for X5 - CATALOGUE

























































































































































































































































































































































































































































Search results

Summary of Contents for X5 - CATALOGUE

Reviews:

Related manuals for X5 - CATALOGUE

Brands by name

Popular brands

BMW X5 - CATALOGUE, Owner'S Manual

Search results

Summary of Contents for X5 - CATALOGUE

Reviews:

Related manuals for X5 - CATALOGUE

Brands by name

Popular brands