BMW X5 - CATALOGUE, Owner'S Manual

Page: 209 / 440

Depending on the national-market version, the
steering intervention is automatically active after
every driving off.
Display in the instrument cluster
The icon illuminates green: at lane mark‐
ing was detected on at least one side of
the vehicle and warnings can be issued.
Warning function
If you leave the lane
If you leave the lane and if a lane marking has
been detected, the steering wheel vibrates in ac‐
cordance with the steering wheel vibration set‐
ting.
When the turn signal is switched on in the corre‐
sponding direction before changing the lane, a
warning is not issued.
Steering intervention
Depending on the equipment version: if, in the
speed range up to 130 mph/210 km/h a lane
marking is crossed, the system may intervene
with a brief active steering intervention in addi‐
tion to vibrating. The steering intervention helps
keep the vehicle in the lane. The steering inter‐
vention can be noticed on the steering wheel
and can be manually overridden at any time. Dur‐
ing an active steering intervention, the display in
the instrument cluster will blink.
Warning signal
Depending on the equipment version: in the
event of multiple active steering interventions by
the system within 3 minutes without the driver's
intervention at the steering wheel, an acoustic
warning will sound. A short warning signal will
sound at the second steering intervention. Be‐
ginning with the third steering intervention, an
continuous warning will sound.
In addition, a Check Control message is dis‐
played.
The warning signal and Check Control message
are an encouragement to pay closer attention to
the lane.
With trailer towing
If the trailer power socket is occupied or trailer
towing is activated, for instance during operation
with trailer or bicycle rack, no steering interven‐
tion takes place.
End of warning
For instance, the warning will be canceled in the
following situations:
▷ Automatically after a few seconds.
▷ When returning to your own lane.
▷ When braking hard.
▷ When blinking.
▷ The Dynamic Stability Control (DSC) adjusts.
System limits
Safety information
Warning
The system is designed to operate in certain
conditions and circumstances. Due to condi‐
tions or other factors, the system may not re‐
spond. There may be a risk of accident or risk
of damage to property. Actively intervene as
warranted. Refer to the information in this Own‐
er’s Manual regarding the scope of the sys‐
tem’s operation and limitations.
System limits of the sensors
Additional information:
▷ Cameras, refer to page 37 .
Functional limitations
The system may be limited in the following situa‐
tions:
Seite 209
Safety
CONTROLS
209
Online Edition for Part no. 01405A37D22 - VI/21