background image

In addition, an icon with a Check Control mes‐
sage appears on the Control Display.

Icon

Possible cause

There is a tire pressure loss.

Measure

1.

Reduce the vehicle speed. Do not exceed a
speed of 80 mph/130 km/h.

2.

At the next opportunity, for instance at a filling
station, check the tire inflation pressure in all
four tires and correct if necessary.

If there is a significant tire pressure
loss

Message

A yellow warning light is illuminated in
the instrument cluster.

In addition, an icon with the affected tire appears
in a Check Control message on the Control Dis‐
play.

Icon

Possible cause

There is a flat tire or a major tire pres‐
sure loss.

Measure

1.

Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneu‐
vers.

2.

Check whether the vehicle is fitted with nor‐
mal tires or run-flat tires.
Run-flat tires are labeled with a circular icon
containing the letters RSC marked on the tire
sidewall.
Run-flat tires, refer to page 

359

.

3.

Read the description on What to do in case of
a flat tire.

Actions in the event of a flat tire, refer to
page 

370

.

Messages: for tires with special

approval

General information

A low tire inflation pressure may cause the DSC
Dynamic Stability Control to be switched on.

Safety information

Warning

A damaged regular tire with low or missing tire
inflation pressure impacts handling, such as
steering and braking response. Run-flat tires
can maintain limited stability. There is a risk of
accident. Do not continue driving if the vehicle
is equipped with normal tires. Follow the infor‐
mation on run-flat tires and continued driving
with these tires.

If a tire inflation pressure check is
required

Message

An icon with a Check Control message appears
on the Control Display.

Icon

Possible cause

Inflation was not carried out accord‐
ing to specifications, e.g., the tire has
not been sufficiently inflated.
The system has detected a wheel
change, but no reset was done.
The tire inflation pressure has fallen
below the level of the last reset.
No reset was performed for the sys‐
tem. The system issues a warning
based on the tire inflation pressures
stored during the last reset.

Seite 369

Wheels and tires

MOBILITY

369

Online Edition for Part no. 01405A37D22 - VI/21

Summary of Contents for X5 - CATALOGUE

























































































































































































































































































































































































































































Reviews: