BMW X2 2022, Owner'S Manual

Page: 100 / 308

In order to be able to release the brake pedal
at a vehicle standstill, engage the selector
lever in position P. The engine remains off.
To continue driving depress the brake pedal.
When a gear is engaged, the engine starts au-
tomatically.
The air flow from the air conditioning system is
reduced when the engine is switched off.
Steptronic transmission: manual
engine stop
Depending on the vehicle equipment and
country version, the engine can be switched off
manually, if the engine was not switched off
automatically when the vehicle stopped:
▷ Depress the brake pedal forcefully again
from the current pedal position.
▷ Engage selector lever position P.
If all functional preconditions are fulfilled, the
engine switches off.
Displays in the instrument cluster
The READY display in the tach-
ometer signals that the Auto
Start/Stop function is ready to
start the engine automatically.
The display indicates that the
conditions for an automatic en-
gine stop have not been met.
Functional limitations
The engine is not switched off automatically in
situations such as the following:
▷ In case of a steep downhill grade.
▷ Outside temperature too low.
▷ The outside temperature is high and auto-
matic climate control is running.
▷ The car's interior has not yet been heated
or cooled to the required level.
▷ The engine is not yet at operating tempera-
ture.
▷ The wheels are at a sharp angle or the
steering wheel is being turned.
▷ After driving in reverse.
▷ Where there is a risk of window condensa-
tion when the automatic climate control is
switched on.
▷ Vehicle battery is heavily discharged.
▷ At higher elevations.
▷ The hood is unlocked.
▷ HDC Hill Descent Control is activated.
▷ The Automatic Parking Assistant is acti-
vated.
▷ Stop-and-go traffic.
▷ Selector lever in selector lever position N,
M/S or R.
▷ Use of fuel with high ethanol content.
Starting the engine
The engine starts automatically to drive off un-
der the following conditions:
▷ Steptronic transmission: by releasing the
brake pedal.
After the engine starts, accelerate as usual.
Safety mode
After the engine switches off automatically, it
will not start again automatically if any one of
the following conditions are met:
▷ The driver's seat belt is unbuckled and the
driver's door is open.
▷ The hood was unlocked.
Some indicator lights light up for a varied
length of time.
The engine can only be started via the Start/
Stop button.
Seite 100
CONTROLS Driving
100
Online Edition for Part no. 01405A540A1 - II/22