BMW S 1000R 2015, Rider'S Manual

Page: 34 / 207

WARNING
Failure of lights on the
vehicle adds to possibility of
other road users overlooking
the vehicle.
Safety risk
Replace defective bulbs as
soon as possible; always carry
a complete set of spare bulbs if
possible.
Possible cause:
Bulb for turn indicator defective.
Replacing bulbs for front and
rear turn indicators (
153).
Possible cause:
The number-plate carrier has
been removed; the motorcycle's
on-board electronics know that
the flashing turn indicators are
not installed on the motorcycle.
Installing number-plate carrier
(
87).
NOTICE
If the number-plate carrier is re-
moved in preparation for a race-
track session, the electronics
detect a bulb failure and the
appropriate warning appears
on the display. Activating the
EQIP WARN LAMP
function in
the
SETUP MENU
suppresses
this warning.
Motorcycle dropped
VDS!
(Vertical Down Sensor)
appears on the blank display.
Possible cause:
The drop sensor has detected a
drop and has cut out the engine.
Bring the motorcycle to the
upright position
Switch the ignition off and
then on again or switch the kill
switch on and then off again.
Drop sensor defective
VDS!
(Vertical Down Sensor)
appears on the display.
Possible cause:
A defect in the drop sensor has
been detected.
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
ABS self-diagnosis not
completed
ABS telltale and warning
light flashes.
3
32
z Status indicators
ProCarManuals.com