BMW S 1000R 2015, Rider'S Manual

Page: 161 / 207

ATTENTION
Battery not disconnected in
accordance with correct pro-
cedure.
Risk of short-circuit
Always proceed in compliance
with the specified disconnec-
tion sequence.
Remove battery negative
lead
2 . Also remove the
washer between the battery
and the battery negative lead.
Remove battery positive lead
1 .
Connecting battery to
motorcycle
Connect battery positive lead 1
first.
Place the washer in position
between the battery and the
battery negative lead. Then
install battery negative lead
2 .
Installing front seat ( 62).
Recharging battery
Disconnecting battery from
motorcycle (
158).
Charge the battery using a
suitable charger.
Comply with the operating in-
structions of the charger.
Once the battery is fully
charged, disconnect the
charger's terminal clips from
the battery terminals.
NOTICE
The battery has to be recharged
at regular intervals in the course
of a lengthy period of disuse.
See the instructions for caring
for your battery. Always fully re-
charge the battery before restor-
ing it to use.
Connecting battery to motor-
cycle (
159).
Removing battery
Remove the front seat ( 62).
Disconnecting battery from
motorcycle (
158).
Lift the battery up and out;
work it slightly back and forth
if it is difficult to remove.
9
159
z Maintenance
ProCarManuals.com