BMW S 1000R 2015 Rider'S Manual Download

Page: 129 / 207

Engine oil, specified level

between MIN and MAX marks

Engine oil, capacity

Viscosity class
approx. 3.5 l (with filter
change)

If the oil level is below the MIN
mark:

Top up the engine oil (

127).

If the oil level is above the MAX
mark:

Have the oil level corrected
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.

Top up the engine oil

Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Wipe the area around the oil
filler neck clean.

Remove cap

of the oil filler

neck.

ATTENTION

Not enough or too much en-
gine oil.

Engine damage

Always make sure that the oil
level is correct.
Top up the engine oil to the
specified level.
Checking engine oil level
(

126).

Install oil filler cap

Brake system

Checking function of
brakes

Operate the brake lever.
The pressure point must be
clearly perceptible.
Press the footbrake lever.
The pressure point must be
clearly perceptible.

127

Maintenance

ProCarManuals.com

Summary of Contents for S 1000R 2015
















































































































































































































Search results

Summary of Contents for S 1000R 2015

Reviews:

Related manuals for S 1000R 2015

Brands by name

Popular brands

BMW S 1000R 2015, Rider'S Manual

Search results

Summary of Contents for S 1000R 2015

Reviews:

Related manuals for S 1000R 2015

Brands by name

Popular brands