BMW S 1000R 2015 Rider'S Manual Download

Page: 198 / 207

FCC Approval

Ring aerial in the
ignition switch

To verify the authorization

of the ignition key, the

electronic immobilizer

exchanges information with

the ignition key via the ring

aerial.

This device complies with

Part 15 of the FCC rules.

Operation is subject to the

following two conditions:

(1) This device may not

cause harmful inter-

ference, and

(2) this device must accept

any interference

received, including

interference that may

cause undesired

operation.

Any changes or modifi-

cations not expressly

approved by the party

responsible for compliance

could void the user’s

authority to operate the

equipment.

ProCarManuals.com

Summary of Contents for S 1000R 2015
















































































































































































































Search results

Summary of Contents for S 1000R 2015

Reviews:

Related manuals for S 1000R 2015

Brands by name

Popular brands

BMW S 1000R 2015, Rider'S Manual

Search results

Summary of Contents for S 1000R 2015

Reviews:

Related manuals for S 1000R 2015

Brands by name

Popular brands