BMW HP2 SPORT Page 111 Rider'S Manual Download

Page: 111 / 184

starting, the onboard socket is
switched off to take the load off
the motorcycle electrical system.

Cable routing

The cables from the onboard
socket to the auxiliary device
must be routed in such a way
that they:

Do not impede the rider
Do not restrict or obstruct the
steering angle and handling
characteristics
Cannot be trapped

Improperly routed cables
can impede the rider.

Route the cables as described
above.

Luggage

Stowing luggage

Air heated by the muf-
fler flows upward through

the grill areas in the tail section.

Loading with excessive weight
can damage the tail section.
Do not transport luggage etc. on
the tail section.

109

Accesso

ries

Summary of Contents for HP2 SPORT

























































































































































































Search results

Summary of Contents for HP2 SPORT

Reviews:

Related manuals for HP2 SPORT

Brands by name

Popular brands

BMW HP2 SPORT, Rider'S Manual

Search results

Summary of Contents for HP2 SPORT

Reviews:

Related manuals for HP2 SPORT

Brands by name

Popular brands