BMW F 750 GS Special vehicle 2018, Rider'S Manual

Page: 68 / 324

If the value in question is
close to the limit of the
permissible tolerance range, the
'General' warning light also lights
up in yellow.
If the tyre pressure re-
gistered by the sensor is
outside the permissible tolerance
range , the 'General' warning light
flashes red.
For further information about
the BMW Motorrad RDC, see
chapter "Engineering details"
from page (
192).
Tyre pressure in limit
range of the permitted
tolerance
with tyre pressure control
(RDC)
OE
General warning light shows
yellow.
is displayed in yellow.
Tyre pressure is not
at setpoint. Check
tyre pressure.
Possible cause:
Measured tyre pressure is close
to the limit of permitted toler-
ance.
Correct tyre pressure.
Before adjusting the tyre pres-
sure, observe the information
on temperature compensation
and pressure adaptation in the
section entitled "Engineering
details":
Temperature compensation
(
192)
Pressure adaptation ( 193)
Find the correct tyre pressures
in the following places:
On the back cover of the
rider's manual
Instrument cluster in the
TYRE
PRESSURE
view
Sign under the seat
Tyre pressure outside the
permitted tolerance
with tyre pressure control
(RDC)
OE
General warning light
flashes red.
is displayed in red.
Tyre pressure is not
at setpoint. Stop
immediately! Check tyre
pressure.
Tyre press. control.
Loss of pressure.
Stop immediately! Check
tyre pressure.
3
66
z Status indicators