BMW F 750 GS Special vehicle 2018 Rider'S Manual Download Page 179

Page: 179 / 324

with metallic additives (e.g.
manganese or iron).
You can run the engine on fuel
with a maximum ethanol con-
tent of 10 %, i.e. E10.

Recommended fuel
grade

Regular, unleaded
91 ROZ/RON
min 87 AKI

Refuelling

WARNING

Fuel is highly flammable

Risk of fire and explosion

Do not smoke. Never bring
a naked flame near the fuel
tank.

WARNING

Escape of fuel due to heat-
induced expansion if fuel
tank is overfilled

Risk of falling

Do not overfill the fuel tank.

ATTENTION

Wetting of plastic surfaces
by fuel

Damage to the surfaces (surfaces
become unsightly or dull)

Clean plastic surfaces immedi-
ately after contact with fuel.
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.

Open protective flap

Unlock the fuel tank cap

the fuel tank by turning the ig-
nition key clockwise and open
up.

177

Riding

Summary of Contents for F 750 GS Special vehicle 2018





































































































































































































































































































































Search results

Summary of Contents for F 750 GS Special vehicle 2018

Reviews:

Brands by name

Popular brands

BMW F 750 GS Special vehicle 2018, Rider'S Manual

Search results

Summary of Contents for F 750 GS Special vehicle 2018

Reviews:

Brands by name

Popular brands