Synchronization
When is it necessary to
synchronize the remote
control?
The remote control must be
synchronized if the buttons of
the remote control have been
pressed more than 256 times
outside the range of the receiver.
In this case, the receiver on the
motorcycle no longer reacts to
the signals of the remote control.
Synchronizing remote
control
Switch on ignition.
Press and hold button
1
and
button
2
.
LED
3
flashes for ten seconds.
As soon as LED goes out, re-
lease button
1
and button
2
.
LED
3
lights up.
Press button
1
or button
2
.
LED goes out.
Remote control is synchro-
nized.
Battery
When is a battery
replacement required?
The batteries of the remote con-
trol must be replaced after ap-
prox. 2 - 3 years. A weak battery
can be recognized from the fact
that the LED does not light up at
all or only briefly when a button is
pressed.
Replacing battery
Remove screw
4
and take off
lower housing section
5
.
Slide old battery
8
forward un-
der hoop
6
.
3
17
z
Operation