Dispose of old battery in accor-
dance with legal regulations; do
not throw battery into house-
hold waste.
Batteries of the wrong type
or incorrect poling of the
batteries can destroy the device.
Use specified battery (see the
chapter "Technical Data"). En-
sure proper poling when inserting
the battery.
Mount new battery; while do-
ing so, make sure that positive
terminal of battery is located at
top.
Position lower housing sec-
tion on lug
9
of front edge and
close while watching two guide
pins
7
.
Install screw
4
.
The LED of the remote con-
trol lights up, i.e. the remote
control must be synchronized.
To synchronize the remote
control, press the button
1
twice within the range of the
receiver.
LED
3
begins to flash and
goes out after a few seconds.
The remote control is ready for
operation again.
3
18
z
Operation
