General Information on
Anti-Theft Alarm
The anti-theft alarm consists
of an immobilizer and an alarm
function with a motion sensor.
The immobilizer prevents the
unauthorized starting of the en-
gine, the alarm function triggers
an alarm on any attempt to move
the motorcycle, to change its po-
sition or to disconnect the motor-
cycle battery.
The sensitivity of the system is
designed so that slight jolts to
the motorcycle do not trigger an
alarm.
You can adjust the behavior
of the anti-theft alarm to your
wishes in partial areas.
Protecting battery
To protect the motorcycle bat-
tery and to maintain starting abil-
ity, the activated anti-theft alarm
automatically switches off the
alarm function after several days.
However, it remains active for at
least seven days. The immobi-
lizer is not deactivated.
Radio interference
Radio systems or devices which
transmit on the same frequency
as the remote control of the anti-
theft alarm can interfere with its
operation. In case of problems of
this kind, point the remote con-
trol at the motorcycle from a dif-
ferent direction.
Splash-water protection
The remote control is splash-wa-
ter protected, however it is not
waterproof. To ensure its proper
operation, BMW Motorrad rec-
ommends protecting the remote
control against heavy rainfall.
Controls
1
Left-hand button (corru-
gated) (
10)
2
Right-hand button (
12)
3
LED
4
Anti-theft alarm indicator
LED on motorcycle
For the position of the in-
dicator LED on the mo-
torcycle, please see the Rider's
Manual of your motorcycle.
2
6
z
Overview
