Retrofit/Installation Kit no. 82 44 0 007 417 Date: 0
3
.2001
Installation Instructions no. 01 29 0 138 198
Reassemble disassembled parts in the
reverse order.
After turning on the ignition, the roof headlight
system can be made operational by operating
the roof-headlight switch in the roof console
(green indicator light).The roof headlights will
only illuminate when the high beam light on the
vehicle is switched on or the headlight flasher is
activated.The roof headlights can be switched
off at any time by using the switch in the roof
console.
After switching off the ignition and then switching
it on again, the roof headlights must be made
operational again by activating the roof-headlights
switch in the roof console.
7.
Function test of roof headlights and adjustment of roof headlights
F 53 0140 EVA
B
A
To adjust the roof headlights, the vehicle should
be positioned at distance
A
in front of a wall.
Switch on the roof headlights. Loosen the
clamping screws for mounting the roof headlights
and adjust the midpoint of light of the two roof
headlights to height
B
. Make the side adjustment
parallel to the low-beam light.Tighten the clamping
screws for mounting the roof headlights in the
base with a torque spanner to 6 Nm.
A:
3 m
B:
1.68 m
Place the covering caps on the roof headlights.
Adjustment of the roof headlights should
take place on an even horizontal surface with an
unladen vehicle (if possible in the dark).
Hand over to the customer the instruction
manual (l), the Allen key (k) and the special tool
(opening spatula) (r).
EN/16