Retrofit/Installation Kit no. 82 44 0 007 417 Date: 0
3
.2001
Installation Instructions no. 01 29 0 138 198
Insert the stabilising ring (1) in the housing (n).
6.
Mount roof headlights
F 53 0163 EVA
1
n
F 53 0164 EVA
2
3
4
n
j
B
1
1
j
j
F 53 0166 EVA
p
1
2
B
c
Thread branch cable
B
through the housing
base (1). Place two half-liners (j) against the
housing base (1) as shown in the magnification.
Insert the housing (n) with the half-liners (j) in the
base support (2) in such a way that the half-
liners (j) abut the crosspiece (3) and cannot twist
round.
Straighten up the housing optically and tighten
the clamping screws (4) with a torque spanner
to 6 Nm.
Pull the cable ends (1) of branch cable
B
through
the rubber grommet (p) and fit the rubber
grommet (p) in the opening of the housing
base (2). Shorten the cable ends (1) to length for
fitting the headlight insert and crimp on to each
of the cable ends (1) a blade receptacle (c).
EN/14