BMW 2006 G 650 Xmoto, Rider'S Manual

Page: 47 / 132

with OE BMW Motorrad ABS:
Switch on ignition.
Pre-ride check is
performed. (
45)
ABS self-diagnosis is per-
formed. (
46)
Wait until coolant—tempera-
ture warning light no longer
flashes if necessary.
After the ignition is
switched on, the idling
positioner is positioned. If
positioning takes longer than
the pre—ride check, this is
signaled by the coolant—
temperature warning light
flashing. You should wait
for this procedure to be
completed to avoid problems
during driving.
Press starter button 1 .
At extremely low tem-
peratures it may be nec-
essary to operate the throt-
tle twist grip during starting.
At ambient temperatures be-
low 32 °F (0 °C), actuate the
clutch after switching on the
ignition.
If the engine fails to
start although the starter
turns, insufficient battery
voltage may be the reason.
Recharge the battery before
you start the engine, or use
jump leads and a donor
battery to start.
Engine starts.
Consult the troubleshooting
chart if the engine refuses
to start. (
100)
Pre-ride check
After the ignition is switched
on, the instrument cluster
conducts a test of the warn-
ing and indicator lights and
the display. This is the so—
called pre—ride check.
Phase 1
All warning and indicator
lights and all segments of
the multifunction display are
switched on for a short time.
Phase 2
The tire parameters stored
in the instrument cluster are
displayed for a short time.
5
45
z Riding