BMW Motorrad S 1000RR 2013, Rider'S Manual

Page: 84 / 200

Customising display
layout
To change the layout of the
display in LAPTIMER mode,
repeatedly press button
2 until
the layout of the display suits
your preferences.
Starting timing
Press button 1 to start timing.
NOTICE
The engine has to be running
in order for the headlight-flasher
signal to be detected.
Every time you cross the start/
finish line, press button
1 again
to start timing for the next lap.
The data of the preceding lap
are written into memory.
Timing continues even if you
exit the display mode. In the
other modes, however, timing
of another lap can be started
only by an external signal.
Infrared receiver
with infrared receiver
OA
An infrared signal provides a con-
venient way of operating the in-
strument panel in LAPTIMER
mode. The instrument panel
can be operated in this way only
when the infrared receiver avail-
able as an optional accessory is
connected. The headlight flasher
button can be used to operate
the instrument panel even when
the infrared receiver is installed.
A lap timeout can be defined to
stop the receiver from registering
completion of a lap prematurely
in response to spurious signals
(
96). Signals received before
this time elapses are ignored.
6
82
z On the race track