BMW Motorrad S 1000RR 2013, Rider'S Manual

Page: 59 / 200

no measures are necessary to
prevent the headlight beam from
dazzling oncoming traffic.
Headlight beam throw and
spring preload
Headlight beam throw is gener-
ally kept constant when spring
preload is adjusted to suit load.
NOTICE
If there are doubts about the cor-
rect headlight beam throw, have
the setting checked by a special-
ist workshop, preferably an au-
thorised BMW Motorrad dealer.
Front and rear seats
Removing rear seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Open seat lock 1 with the igni-
tion key.
Lift the rear seat at the rear
and then work it back and up
to remove.
Remove the ignition key from
the lock and place the rear
seat, upholstered side down,
on a clean surface.
Installing rear seat
Engage the rear seat in
mounts
2 on left and right.
Swing the rear seat down,
pushing it lightly forward.
4
57
z Operation