26
PRODUCT INFORMATION SHEET
BMT chooses raw materials and technology with extreme care, and deals only with suppliers who are qualified and
reliable. The following are a list of products utilized and their specific characteristics:
1)PAINTS:
a.MDF :
with regard to undercoating, we use an undercoat with elevated hiding power, easy to sand
and suitable for extremely absorbent woods needing several coats of paint, such as chipboard and
medium density.
b.MDF:
with regard to top-coating to give the final colour to the part in question, we use finishing
lacquers which not only have an elevated pigmenting power but also give a considerable surface
hardness. They can be applied to a variety of backing and over any kind of undercoat, whether
polyurethane or polyester.
c.IDROPAN:
the undercoat over the chipboard IDROPAN veneered natural wood, it is made by two
acrylic paint's passing.
d. IDROPAN:
the top-coating over the chipboard doors IDROPAN veneered, I has a mat acrylic
finishing touch. The quality obtained by the acrylic painting is better than polyester because the
paint depth enters in the natural wood grains. This allow a better scratch and damp's resistance.
e.
The company producing these products is certified in accordance with the ISO 9000 Quality
System.
2)MDF
: The MDF panel used for the production of doors is defined as a super-panel because it is obtained from
special lignocellulose fibres and special glues to make extremely compact material, suitable for working on the
pantograph. Furthermore, the certified physical/mechanical characteristics include:
a.
Breaking Load Standard UNI EN 310
b.
Thickness Tolerance Standard UNI EN 324-1
c.
Surface Delamination Standard UNI EN 311
d.
Swelling over 24h Standard UNI EN 317
The producer company is certified in accordance with the ISO 9000 Quality System.
3)IDROPAN
: Idropan chipboard is used only for some structural parts. The prime characteristic that distinguishes
this material from normal chipboard is the high density of virgin wood in its composition. By a special procedure,
the larger particles are distributed towards the inside of the panel and the finer ones to the outside so that better
finishing and greater versatility of application can be obtained. Furthermore, the following are some of the
physical/mechanical characteristics certified:
a.
Water absorption;
b.
Formaldehyde EN 120/92 (low content 6.7mg. Minimum requirement necessary to be considered E1);
c.
resistance to Humid Heat UNI 9117;
d.
resistance to Dry Heat UNI 9116;
e.
resistance to abrasion UNI 9115;
The producer company is certified in accordance with the ISO 9000 Quality System.
This material is classified as ECOLOGICAL PANELLING.
4)MDF-IDROPAN-PAINTS
: The products used by BMT are approved and certified by CATAS (Centro Assistenza
Tecnico Settore) the Centre for Technical Assistance in the sector of wood and furniture, a qualification recognized
at a national and international level.
5)HINGES
: Into notable details to point out for product's judgment, hinges provided of world leader in the production
of these technical accessories, which are certified in accordance with the ISO 9000 Quality System. All our hinges
have a three-way system of regulation.
6)MIRRORS
: The silvering of our mirrors is obtained through a special process which guarantees against corrosion.
In fact, the silvering operation is carried out after completing all other processes necessary for the production of
the mirror (edging, grinding, engraving); or carried out from GLAVERBEL new ecology leader in silvered before
process sheet's delivery.
7)SILICONS
: With regard to the production of mirrors, attention is given not only to the choice
of the mirror itself, but also to that of a good quality silicon.
