BMC RESmart BPAP 20T User Manual Download Page 19 | Manualshive

Page: 19 / 27

background image

RESmart BPAP 20T/25T/30T User Manual V1.1

17 / 25

Eng

lis

h

6. Accessories

6.1 Adding a Humidifier

The InH2 Heated Humidifier is available from your home care provider. The humidifier may
reduce nasal dryness and irritation by adding moisture (and heat if applicable) to the airflow.

WARNING!

The RESmart unit should only be connected to the humidifiers or accessories specified in this
Manual. Connection of other Items may result in injury or damage to the RESmart unit.

6.2 Adding Oxygen

Oxygen may be added at the mask connection. Please note the warnings listed below when
using oxygen with the RESmart BPAP 20T/25T/30T.

WARNING!

The oxygen supply must comply with the local regulations for medical oxygen.

WARNING!

Turn the RESmart BPAP 20T/25T/30T on before turning the oxygen on. Turn the oxygen off
before turning the RESmart BPAP 20T/25T/30T off.
Explanation of Warning: When the RESmart BPAP 20T/25T/30T is turned off, but the oxygen
flow is still turned on, oxygen may accumulate within the RESmart BPAP 20T/25T/30T
enclosure and create a fire risk. Turning the oxygen off before turning the RESmart BPAP
20T/25T/30T off will prevent oxygen accumulation in the RESmart BPAP 20T/25T/30T and will
reduce the risk of fire. This warning applies to most BPAP devices.

WARNING!

Oxygen accelerates fires. Keep the RESmart BPAP 20T/25T/30T and the oxygen container away
from heat, open flames, any oily substance, or other sources of ignition. DO NOT smoke in the
area near the RESmart BPAP 20T/25T/30T or the oxygen container.
Contact your home care provider for additional information on the accessories available for the
RESmart BPAP 20T/25T/30T. When using optional accessories, always follow the instructions
enclosed with the accessories.

«
...
17
18
19
20
21
...
»

Summary of Contents for RESmart BPAP 20T




























Reviews:

No comments

Related manuals for RESmart BPAP 20T

Brand: Oase Pages: 16

Brand: Morphy Richards Pages: 1

Brand: BaByliss Pages: 107

Brand: Safety 1st Pages: 2

Brand: HOFFEN Pages: 34

Brand: MSD Pages: 33

ESSENCE 280 SMART POWER 120

Brand: ergoline Pages: 124

Brand: JCS Wellness Solutions Pages: 12

Brand: Weinmann Pages: 24

Brand: SYSTEMAT Pages: 16

Brand: oneConcept Pages: 12

Go-Tech Adventure Harness

Brand: Kurgo Pages: 2

Brand: ProMed Pages: 108

Brand: ProMed Pages: 96

Brand: ProMed Pages: 134

Brand: D.T. System Pages: 10

Brand: Lattoflex Pages: 22

Brand: Ferplast Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands