BMC RESmart BPAP 20T User Manual Download Page 27 | Manualshive

Page: 27 / 27

background image

RESmart BPAP 20T/25T/30T User Manual V1.1

25 / 25

Eng

lis

h

Limited Warranty

BMC Medical Co., Ltd. warrants that the RESmart BPAP device shall be free from defects of
workmanship and materials and will perform in accordance with the product specifications for a
period of one (1) year for main unit and three (3) months for all accessories from the date of
sale by BMC

Medical Co., Ltd.

to the dealer. If the product fails to perform in accordance with

the product specifications, BMC

Medical Co., Ltd.

will repair or replace, at its option, the

defective material or part. BMC

Medical Co., Ltd.

will pay customary freight charges from BMC

Medical Co., Ltd.

to the dealer location only. This warranty does not cover damage caused by

accident, misuse, abuse, alteration and other defects not related to material or workmanship.
BMC MEDICAL CO., LTD. DISCLAIMS ALL LIABILITY FOR ECONOMIC LOSS, LOSS OF PROFITS,
OVERHEAD OR CONSEQUENTIAL DAMAGES WHICH MAY BE CLAIMED TO ARISE FROM ANY
SALE OR USE OF THIS PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
To exercise your rights under this warranty, contact your local, authorized dealers or:

MANUFACTURER:
BMC Medical Co., Ltd.

Room 110 Tower A Fengyu Building, No. 115 Fucheng Road, Haidian, 100036
Beijing, PEOPLE’S REPUBLIC OF CHINA
Tel: 86-10-51663880
Fax: 86-10-51663880 Ext. 810

EU AUTHORISED REPRESENTATIVE:

Shanghai International Holding Corp. GmbH (Europe)
Eiffestrasse 80, 20537 Hamburg, Germany
Tel: 0049-40-2513175
Fax: 0049-40-255726

Issue date: 12th October, 2014

«
...
25
26
27

Summary of Contents for RESmart BPAP 20T




























Reviews:

No comments

Related manuals for RESmart BPAP 20T

Brand: b-mMla Pages: 10

Brand: Prevue Pet Products Pages: 2

Brand: Orliman Pages: 12

Brand: Me Pages: 52

Brand: ZAMST Pages: 14

Pure Perfection Body Brush

Brand: JML Pages: 5

PIXI Drinking Fountain

Brand: Catit Pages: 21

Brand: TES CENTER Pages: 12

Brand: Impacto Pages: 2

SUN SELECT 1400

Brand: ergoline Pages: 80

SILVERSHIELD EMF Shielding Tent

Brand: dr. Mercola Pages: 2

Brand: Garmin Pages: 7

Brand: Garmin Pages: 16

Brand: Cozee Paws Pages: 2

Brand: Cozee Paws Pages: 4

Brand: cozee home Pages: 8

ParaSpaMini PAR-100C

Brand: HoMedics Pages: 8

Brand: decakila Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands