M1 Mini User Manual
21 / 32
and its accessories. Liquid soap containing the humidifying agent or antimicrobials should not
be used either. These solutions may harden cleaned materials or reduce their life.
• Do not clean or dry the device and its accessories when the temperature is higher than 80°C
(176°F). High temperatures could reduce product life.
• Do not immerse the device in any fluids.
18.1 Cleaning the Mask and Headgear
For details, refer to the cleaning instructions in the user manual for the mask.
18.2 Cleaning the Enclosure
Wipe the surface of the device with a soft, slightly damp cloth.
CAUTION!
• The device can only be used after the enclosure is dry, so that no moisture enters the device.
18.3 Cleaning the Tubing
(1) Remove the tubing from the device and mask before cleaning.
(2) Clean the tubing in warm water which contains washing liquid, and then rinse it in clean
water thoroughly.
(3) After cleaning, air-dry the tubing in a cool, well-ventilated area, and avoid direct sunlight. It
takes approximately 30 minutes to completely air-dry the tubing. Check whether the tubing is
completely dry before re-use.
18.4 Replacing the Air Filter
(1) Open the air filter cap to remove the air filter.
(2) Put the new air filter in the filter area, and then place the filter cap back properly, as shown
in Fig. 18-1.
Fig. 18-1
