M1 Mini User Manual
18 / 32
14. Prompt
Prompt
Message
Description
Power
Failure!!!
If the device is accidentally disconnected from power when it is
delivering air and the main device is connected with LightTrip App by
Bluetooth, a prompt of "
Power Failure!!!
" will appear in LightTrip App.
Note:
The prompt will not appear if power failure occurs when the device is in
standby state.
Device
Fault!!!
If no airflow comes out of the machine when the device is started, the
status light of device will flash. If the main device is connected with
LightTrip App by Bluetooth, a prompt of "
Device Fault!!!
" will appear in
LightTrip App.
Leak!!
If the Auto Off function of the device is off, when there is a large amount
of air leakage in the device, the device status light flashes. If the main
device is connected with LightTrip App by Bluetooth, a prompt of
"
Leak!!
" will appear in LightTrip App.
Low Input
Voltage!!
If the voltage supplied by the power adapter is too low,the status light of
device will flash. If the main device is connected with LightTrip App by
Bluetooth, a prompt of "
Low Input Voltage!!
" will appear in LightTrip
App.
Please
change the
air filter!
When the remind cycle of air filter is set, the status light of device will
flash if the preset remind cycle reaches but without replacing the air
filter and reset remind cycle. If the main device is connected with
LightTrip App by Bluetooth, a prompt of "
Please change the air
filter!
" will appear in LightTrip App.
Please
replace the
tubing!
When the remind cycle of tubing is set, the status light of device will
flash if the preset remind cycle reaches but without replacing the tubing
and reset remind cycle. If the main device is connected with LightTrip
App by Bluetooth, a prompt of "
Please replace the tubing!
" will
appear in LightTrip App.
Please
replace the
mask!
When the remind cycle of Mask is set, the status light of device will flash
if the preset remind cycle reaches but without replacing the mask and
reset remind cycle. If the main device is connected with LightTrip App by
Bluetooth, a prompt of "
Please replace the mask!
" will appear in
LightTrip App.
Please
replace the
moisture
exchanger!
When the remind cycle of moisture exchanger is set, the status light of
device will flash if the preset remind cycle reaches but without replacing
the moisture exchanger and reset remind cycle. If the main device is
connected with LightTrip App by Bluetooth, a prompt of "
Please
replace the moisture exchanger!
" will appear in LightTrip App.
Please
perform
cleaning and
maintenance!
When the remind cycle of cleaning and maintenance is set, the status
light of device will flash if the preset remind cycle reaches but without
cleaning or maintaining and reset remind cycle. If the main device is
connected with LightTrip App by Bluetooth, a prompt of "
Please
perform cleaning and maintenance!
" will appear in LightTrip App.
