Blyss 3663602673026 Original Instructions Manual Download Page 3

4

5

NDY-19MA-E

NDY-19MA-E

Safety information

Safety information

Getting

 Started . . .

Getting

 Started . . .

12. Keep the heater clean. Do not allow any objects to enter any 

ventilation or exhaust opening as this may cause electric 

shock, or fire or damage to the heater.

13. Always unplug or disconnect the appliance from the mains 

power supply when not in use or when moving or cleaning it.

14. Do not pull the cord to unplug the heater.

15. Do not immerse the cord, plug or any part of the appliance 

in water or any other liquid.

16. Do not attempt to repair, disassemble or modify the appliance. 

There are no user-serviceable parts inside.

17. The heater must not be located immediately below a socket-

outlet.

18. This appliance can be used by children aged from 8 years 

and above and persons with reduced physical, sensory or 

mental capabilities or lack of experience and knowledge if 

they have been given supervision or instruction concerning 

use of the appliance in a safe way and understand the 

hazards involved. Children shall not play with the appliance. 

Cleaning and user maintenance shall not be made by 

children without supervision.

19. Children of less than 3 years should be kept away unless 

continuously supervised. Children aged from 3 years and less 

than 8 years shall only switch on/off the appliance provided 

that it has been placed or installed in its intended normal 

operating position and they have been given supervision or 

instruction concerning use of the appliance in a safe way 

and understand the hazards involved. Children aged from 3 

years and less than 8 years shall not plug in, regulate and 

clean the appliance or perform user maintenance.

20. If the supply cord is damaged, it must be replaced by the 

manufacturer, its service agent or similarly qualified persons 

in order to avoid a hazard.

21. CAUTION — Some parts of this product can become very 

hot and cause burns. Particular attention has to be given 

where children and vulnerable people are present.

22. CAUTION – If using an extension lead please ensure you 

do not exceed the maximum rated running wattage/load of 

the extension lead.

23. This IPX0 appliance cannot be installed in a bathroom.

24. CAUTION: In order to avoid a hazard due to inadvertent 

resetting of the thermal cutout, this appliance must not be 

supplied through an external switching device, such as a 

timer, or connected to a circuit that is regularly switched on 

and off by the utility.

25. Regarding the installation and maintenance information 

refer to page 14-17.

26. Do not use this heater in the immediate surroundings of a 

bath, a shower or a swimming pool.

27. Means for disconnection having a contact separation in all 

poles must be incorporated in the fixed wiring in accordance 

with the wiring rules.

WARNING!

 In order to avoid overheating, do not cover 

the heater.

WARNING!

  DO NOT COVER THIS APPLIANCE WITH 

ITEMS SUCH AS CLOTHING, BLANKETS OR PLACE 

IT NEXT TO CURTAINS OR NETS/BLINDS.

Summary of Contents for 3663602673026











Reviews: