Blyss 3663602673026 Original Instructions Manual Download Page 2

2

3

NDY-19MA-E

NDY-19MA-E

Getting

 Started . . .

Safety warnings

PLEASE READ THE FOLLOWING

INSTRUCTIONS CAREFULLY

BEFORE USING THE APPLIANCE.

1.  CAUTION - Fire, electric shock, physical injury and material 

damage hazards.

2.  To use the appliance, always follow the instructions for 

assembly, use and maintenance as well as usage cautions.

3.  Carefully read and retain these instructions.

4.  Before connecting the appliance, be sure that the mains 

voltage available matches that specified on the rating plate.

5.  THIS APPLIANCE MUST BE WALL MOUNTED. IT IS NOT 

SUITABLE FOR USE AS A FREE STANDING APPLIANCE. 

Operating the product in any other position could cause a 

hazard.

6.  There may be trace of odour during the first few minutes of 

initial use. This is normal and will quickly disappear.

7.  The heater is hot when in use .To avoid burns, do not let 

bare skin touch any hot surface.

8.  Keep combustible material such as furniture, cushions, 

bedding, paper, clothes, curtains etc. at least 1m away from 

the heater.

9.  Do not use the heater in areas where flammable liquids are 

stored or where flammable fumes may be present.

10. Do not cover or obstruct any of the heat outlet grilles or the 

air intake openings of the heater.

11. Do not use the heater in any room where there is explosive 

gas or while using inflammable solvents, varnish or glue.

Let’s

get started...

These instructions are for your safety. Please read through them 
thoroughly before use and retain them for future reference.

Getting

 Started... 

02

Safety

 

information

  

03

Before you start

 

06

Your

 

product

 

06

Installation 

 

07

In 

more

 detail... 

9

Operation

 

9

Technical specification 

13

Cleaning and maintenance 

15

Recycling and disposal 

17

 

Safety information

Summary of Contents for 3663602673026











Reviews: