![BluStream Multicast IP250UHD-RX User Manual Download Page 34](http://html1.mh-extra.com/html/blustream/multicast-ip250uhd-rx/multicast-ip250uhd-rx_user-manual_2779406034.webp)
IP250UHD
USER MANUAL
www.blustream.com.au
|
www.blustream-us.com
|
www.blustream.co.uk
34
Functions
(Receiver):
Enable Video over IP: on by default. Do not un-check this box.
Enable Video Wall: on by default. Un-checking this will remove Video Wall functionality from the unit.
Copy EDID from the Video Output: we recommend using the ACM200 web-GUI to perform the Copy EDID function
within a system.
Scaler Output Mode: as per page 23, set the scaled output to match the maximum resolution of the display connected
where the display cannot accept the full resolution of the source device.
Timeout for Detecting Video Lost: 10 seconds by default. Adjust this setting to hold the last frame of media received by
the Receiver device before reverting to the Blustream Multicast splash screen where source device is turned
off, or the connection is lost between the source and Transmitter.
Audio over IP: allows you to assign the source input (Transmitter in or Dante in) for each of the avialable audio outputs
(HDMI out or Analogue out), as well as for the Dante out ( Transmitter in or SPDIF in).