47
EN
Problem
Potential cause
Solution
Sudden drop in gas
pressure or reduced
flame height
No gas.
Check the gas level in
the liquefied gas tank.
The overcurrent
protection may have
been activated.
Turn the control dial
to the “OFF” position,
wait 30 seconds and
re-ignite the device.
If the flame height is
still reduced, reset the
overflow protection
by turning the control
knob and the gas bottle
valve to the “OFF”
position. Disconnect
the gas pressure
regulator from the
device. Turn the control
knob to the "HIGH"
position. Wait at least
5 minutes. Then turn
the control dial to
the “OFF” position.
Reconnect the gas
pressure regulator to
the device. Perform a
leak test. Slowly turn
the gas bottle valve to
the “ON” position. Wait
30 seconds and then
press the igniter.
