35
EN
•
Never attempt to connect this device to the self-contained liquefied gas
system of a caravan, motor home, or house.
• Always use the hose and gas pressure regulator included in the scope of
delivery to connect the device to a liquid gas cylinder. Never connect the
device to an unregulated liquid gas supply.
• Contact customer service for replacement parts.
• Only open or close the gas bottle valve by hand. Never use tools for this. If
the valve does not turn by hand, do not try to repair it yourself. Contact a
certified gas technician. Use of force or attempted repairs can lead to fires
and explosions.
Instructions for connecting the gas bottle to the device
• Use only the type of gas and gas bottle recommended by the
manufacturer.
•
The device is equipped with a gas pressure regulator, a flexible gas-rubber
hose and clamps that comply with the national regulations applicable in
the country of destination.
• The device must be equipped with an approved gas pressure regulator
(approved for an operating temperature of at least 50 ° C) in accordance
with the EN standard (see information on the required gas pressure in the
"Gas specifications" section
as well as the description for connecting the gas pressure regulator to
the inlet and outlet according to the applicable national regulations in the
"Installation" section) and a flexible gas hose according to EN 16436-1
(with a suitable inner diameter corresponding to the connection at the gas
inlet according to the applicable national regulations) with a length of max.
3 m and approved for an operating temperature of at least 60 ° C). Only
replace the gas pressure regulator, the flexible rubber gas hose and the
clamps with replacement parts recommended by the manufacturer. The
gas pressure regulator should be replaced at least every 10 years.
•
Handle the flexible gas hose with care. Make sure that it is not twisted or
kinked. Never use a damaged gas pressure regulator.
• Never connect the device to an unregulated gas source (the use of a gas
pressure regulator is mandatory).
•
When the device is not in use, turn the gas bottle valve to the “OFF”
position.
•
The flexible gas hose must be carefully inserted into the gas bottle
compartment. Be careful not to twist it.
• After connecting a gas bottle, always check the gas connections for leaks
using a soap solution. If bubbles form, it indicates a leak. Do not use the
device until you have fixed the leak. Never perform a leak test with an
open flame!
This is strictly forbidden and dangerous!
• Always change gas bottles in a well-ventilated area outdoors, away from
ignition sources.
