6
BA-102/2EN M54.XXXX
• This machine complies with current safety standards. However, risks remain for
• the operator and second persons due to the stroke movement of the drilling unit and especially in case safety devices are removed
or control elements should fail.
• Other remaining risks are indicated by the safety decals and in the following safety rules. It is therefore absolutely necessary to fol
-
low all safety instructions carefully.
D.1- Remaining risks according to ISO EN 12100-2
D - Safety information
D.2 - Safety decals
D.3 - Intended use
• The designated purpose of the assembly machine is the drilling and insertion of furniture fittings into work pieces made of wood,
particle board or plastic coated wood. The assembly machine should only be used in manufacturing. The assembly machine is only
intended for stationary operation. The manufacturer does not assume liability for uses not described in the instruction manual.
• The intended purpose of the laser marking line is measurement and position determination on the work piece.
Only wood or particle board should be used as the work piece since they are non-reflective. Coated and/or reflective work pieces
may not be used.
• The machine is not explosion-proof. It should not be set up near a paint finishing system
Completely read the operating instructions and the safety information before operating the assembly machine
Wear proper eye and face protection when operating this machine
Only one person at a time must operate the machine.
The work area is located in front of the machine.
Electrical connections and maintenance should only be performed by a qualified electrician.
Disconnect electrical and pneumatic connections before making any repairs (plug / rapid hose coupling).
Keep hands away from the drill or swing arm during the drilling or insertion process.
Do not remove safety devices - danger of injury.
Keep hands away from the danger zone. - danger of being crushed
Wear proper ear protection when operating this machine
Class 2M laser - Never look directly into the laser beam. The laser can cause eye damage.