3
BA-102/2EN M54.XXXX
B - Table of contents
A- Orientation diagram
2
B - Table of contents
3
C - Reading guide
5
C.1 - How to use these operating instructions
5
D - Safety information
6
D.1- Remaining risks according to ISO EN 12100-2
6
D.2 - Safety decals
6
D.3 - Intended use
6
D.4 - Safety information
7
D.5 - Noise emission
7
D.6 - Dust emission
7
E - Serial tag
8
F- EC Declaration of Conformity / Techn. Data
9
F.1 - EC Declaration of Conformity
9
F.2 - Technical data
9
1 - Assembly machine setup
10
1.1 - Unpacking and assembly
10
1.1.1) Assembly machine space requirement
10
1.1.2) Space requirement of drilling head and ruler storage rack (optional)
10
1.1.3) Unpacking assembly machine
10
1.1.4) Use lifting machine to place machine on table
10
1.1.5) Securing assembly machine to a suitable table
10
1.1.6) Removing ring screw (2.6)
11
1.1.7) Attaching table (2.7)
11
1.1.8) Attaching handle
11
1.2 - Connecting to compressed air system
11
1.2.1) Connecting air supply
11
1.2.2) Setting operating pressure (2.2)
11
1.3 - Electrical connection
12
1.3.1) Electrical connection
12
1.3.2) Checking motor rotation
12
1.3.3) Correcting motor rotation
12
1.4 - Dust extraction
13
1.4.1) Connecting extraction system to the assembly machine
13
1.4.2) Attaching the extraction system with the controller
13
2 - Description of operator panel
14
2.1 - Description of operator panel
14
2.1.1) Designation of operating elements
14
2.1.2) Feed switch (3.2)
14
2.1.3) Hold down clamp switch (3.3)
14
3 - How to operate the machine
15
3.1 - Vertical drilling unit
15
3.1.1) Gearbox replacement
15
3.1.2) Replacing rulers
15
3.2 - Setting work top to drilling distance
16
3.2.1) Setting drilling distance
16
3.3 - Setting clamps
16
3.3.1) Setting hold down clamps (4.3) to the material thickness
16
3.4 - Setting drilling depth
16
3.4.1) Setting drilling depth
16
3.5 - Setting cam speed
16
3.5.1) Setting cam speed (4.5)
16
3.5.2) Checking cam brake
16
3.5.3) Setting cam brake (4.7)
17
3.6 - Setting operating mode
17
3.6.1) “Drilling” and/or “Drilling and inserting fittings” mode switch (4.6)
17
3.7 - Drilling and inserting fittings
17
3.7.1) Assembly of furniture hinges, furniture connectors, METABOX and TANDEM front fixing brackets 17
3.7.2) Clipping fitting onto insertion ram (4.7)
18
3.7.3) Pushing work piece to the swivel stop (9.1)
18
3.7.4) Pushing work piece to the marking line
18
3.7.5) Drilling
18
3.7.6) Inserting the furniture hinge
18
4 - Drilling depth setup explanation
19