Document #: BPI-PM013-00
7
Preparation
Unpack the Bluezone PK-220 and locate the included wall mounting cleat. See arrows in Figure
4 for recommended fastener install locations.
Figure 4: PK-220 Wall Mounting Cleat
Securely fasten the mounting cleat to the wall using the recommended fasteners shown in Table
2. If installing to metal or wood studs the bracket must be secured to 2 studs. It is the installers
responsibility to determine fasteners. All fasteners must be rated for 120lbs or greater.
For floor placement, mount the
cleat 41 ½” off the floor. The installation of the wall mounting
cleat is required to prevent the PK-220 from tipping. Failure to secure the PK-220 with the
mounting cleat can result in injury.
Figure 5: Cleat Mounting Height for Floor Placement of the PK-220
Summary of Contents for PK-220
