BlueTree BT4400, Product Manual

Page: 31 / 38

Chapter 4: Installing the Modem
V0.0 BlueTree Wireless BT4400 & BT5400 Product Manual 31
Creating the DUN profile To create a Windows XP DUN connection:
1.
Click Start > Settings > Control Panel > Network Connects > New
Connection Wizard.
2.
On the New Connection Wizard welcome box click Next .
3.
On the Network Connection Type box select Connect to the
Internet , and then click Next .
4.
On the Getting Ready box select Set up my connection
manually , and then click Next .
5.
On the Internet Connection box select Connect to a dialup
modem , and then click Next .
6.
On the Select a Device box select the 33600bps modem and then
click Next .
7.
On the Connection Name box, type in a name for the connection
(for example: CDMA ) and then click Next .
8.
On the Phone Number to Dial box type the phone number, as
supplied by your wireless service provider. For example, type #777 for
1xRTT packet data connections.
9.
On the Internet Account Information box, type the username and
password in the corresponding fields and then click Next .
The DUN connection is now set up and ready to connect to the wireless
network.
9) Connecting to
the wireless
network using the
ethernet port
(RJ45)
Note: The following section is only required if you want to connect to the
network using a PC/laptop with Windows 2000/XP. It is described here as an
example of how a LAN connection between the PC and the BT4200/5200
modems is setup.
The BT4400/5400 modem has a DHCP server continuously running on
its RJ45 ethernet interface. As soon as a PC is connected to it, the
modem will automatically assign and LAN IP address to the PC.
When this is done, the user will see the following message on its PC
monitor.