BlueTree BT4400, Product Manual

Page: 25 / 38

Chapter 4: Installing the Modem
V0.0 BlueTree Wireless BT4400 & BT5400 Product Manual 25
Chapter 4: Installing the Modem
Installing the modem is a nine step process:
1.
Unpacking the modem
2.
Install the SIM (Subscriber Identity Module) card
3.
Mounting the modem
4.
Installing the cellular antenna
5.
Installing the GPS antenna (BT5400 model only)
6.
Installing the power cable
7.
Connecting the data cables
8.
Configuring the modem
9.
Connecting to the wireless network
1) Unpacking the
Modem
When the modem arrives, check that the package contains the
following items:
•
BT4400 or BT5400 modem
• 15-foot power cable with 2A in-line fuse
• Extra serial number label
• Quick Start Guide
Any items missing from this list, please call your local representative.
2) Installing the SIM
card
Before inserting the SIM card, be sure the power cable is disconnected
from the modem. The SIM card might not be detected if inserted while
the modem is already powered.
Locate the SIM’s push button on the front of the modem using the tip of
a pen, push in the button until the SIM tray is ejected completely,
remove SIM tray with your fingers, Install the SIM card into the tray
with its golden pins facing up, Slide the SIM tray back into its position
in the modem, with golden pins facing up, Using the tip of a pen, push
the tray all the way until you feel it locking.