Settings
Touch “Level Speaker” on main settings interface(
), the level speaker setup
interface appears:
PIC 37
Calibration
Touch ”Calibration” on the main settings interface (
), the calibration setup appears.
Touch 1,2,3,4,5 cursor to calibrate the touch screen. Once the calibration is done, it doesn’t need
to calibrate every time you run the player, only calibrate it when the touch buttons are not in correct
positions.
PIC 37
PIC 45
PIC 46
-- Close current interface/go back to last interface
Touch to adjust balance/fader levels to meet your desired effect.
-- Reset the settings
-- Go back to last interface without saving new settings
-- Save new settings and go back to last interface
Note
PIC 47
PIC 45
PIC 46
for standard version;
for higher version.
-- Go back to the Main Source interface
30
After connecting the steering wheel control wires to the car, operate as followings:
Press a button on steering wheel, you will see a voltage value shows on the interface, select the
corresponding button from the interface (for example, you press on the steering wheel, the
voltage value will show here , then press on the interface, then press OK,then press
Default to set this button as default setup). It is same setup principle for the other buttons. Max 6
buttons could be setup.
PIC 48
-- Last One/Next One
-- Fast backward/forward
-- Volume -
-- Up/Down/Left/Right/Confirm
-- Mute
-- Play/Pause
--
Stop
-- Receive call
-- Hang up call
-- Switch betwwen this unit and phone
-- Play section from A to B
Steering wheel controls
Touch ”STEER” on the top in main settings interface(
), the steer setup interface appears:
PIC 3
--
31
_____________________________
_____________________________
Summary of Contents for BLP-840
Page 1: ...INSTRUCTIONMANUAL BLP 890 BLP 840CUSTOMNAVIGATIONSYSTEM...
Page 2: ......
Page 9: ...7 ______________________ Location and function of controls...
Page 36: ......
