1
.
ASSEMBLING THE STAND
2
.
GRILLE ATTACHMENT
3
.
REAR GRILLE ATTACHMENT
Push the
fan blades
6
onto the motor axle
of the
fan motor
1
as far as you can.
Make sure that the 2 pins of the motor axle
fit into the grooves of the
fan blades
6
.
Rotate the
grille
attachment
2
counter-clockwise to remove it from the
motor axle.
Attach the
fan blades
6
with the
fan
fastener
7
, by rotating it counter-
clockwise.
Check if the
fan blades
6
can rotate freely
by rotating them manually.
Open the
grille closure ring
4
by about
3mm. Place the
grille closure ring
4
around the
rear grille
3
.
Put the front
grille
8
on the
rear grille
3
and close the
grille closure ring
4
.
Place the
rear grille
3
on the designated
pins on the
fan motor
1
.
Attach it with the
grille attachment
2
by
rotating it clockwise.
Need help?
Call
010 798 89 99
Coolblue.nl/en/customer-
service
Pull the power cord through the hole in the
stand
5
.
Place the
fan motor
1
on the
stand
5
,
in such a way that the protrusions fit the
cutouts of the
stand
5
.
Rotate the
fan motor
1
clockwise to
attach it to the
stand
5
.
CBL1172/CBL1173/CBL1174
4
.
FAN BLADES
5
.
FAN FASTENER
6
.
FRONT GRILLE ATTACHMENT
Follow all instructions as described here and
only use the included parts. Always let experts
handle repairs, or the warranty will be voided
and we won’t be liable. That would be a waste
of your purchase. Coolblue isn’t liable for any
injury, damage, or bad hair days as a result of
incorrect installation.
Tip:
Don’t throw out the box
containing the fan, but use it
to store the fan at the end of
the season.
Make sure the connector isn’t
plugged into the socket.
CHECKLIST
.
You’re 50% there.
