To Enable
:
Revolution Alarm
1
Open the
App Drawer
2
Select
Settings
3
Select
Revolution Alarm
4
Enable
Revolution Alarm
5
Input Values
!
Amount of Revolutions
6
Select
Save
to save the settings
8.10 Revolution Alarm
This mode will allow the user to set an alert once a set number of revolutions has been
reached. One of the primary factors effecting tube life is the number of revolutions the tube
has operated. The M4 includes a roller revolution counter. A revolution alarm set point can be
inputted which will alert the user when the tube should be serviced. When the set point is
reached, the pump will display “Revolution Count Exceeded”
however
THE PUMP WILL NOT STOP
Default settings: Amount will vary depending on tube that is installed
To Enable Time of Day:
1
Open the
App Drawer
2
Select
Time of Day
3
Select
Settings
to configure
4
Input Values
!
Motor Speed (percentage)
!
Run Time (in minutes)
!
Time of Day
5
Select
Save
to save the settings
8.9
Time of Day
This mode allows the user to run the pump at a specific motor speed for a specific length of
time beginning at a specific time of day.
Three values to be defined:
1) Percent Motor Speed
2) Run time (in minutes)
3) Time of Day that the pump will turn on
Page 28
®
FLEXFLO M4
Page 29
®
FLEXFLO M4
8.0
Input Setup
8.0
Input Setup
Verify the time on the pump is in synch with your local time zone
