To Enable Auto-Prime:
1
Open the
App Drawer
2
Select
Settings
3
Select
Auto-Prime
4
Enable
Auto-Prime
5
Input Values
!
Prime duration (in seconds)
!
Percent Motor Speed
6
Select
Save
to save the settings
8.8
Auto-Prime
This mode will allow the user to prime the pump remotely using the dry contact. Both
prime duration and percent motor speed is configurable.
Default settings:
60 Seconds at 100% Motor Speed
To Prime The Pump:
1
Open the
App Drawer
2
Select
Prime
3
Select
Start
to Prime the pump
4
Pump will run at 100% motor
speed for sixty seconds
5
Pump will remain in
Prime
Input
8.7
Prime
This mode allows the user to prime the pump at 100% motor speed for sixty seconds. After the
prime is complete the pump will remain in this mode ready to be primed again.
To exit: select another input method.
Page 26
®
FLEXFLO M4
Page 27
®
FLEXFLO M4
8.0
Input Setup
8.0
Input Setup
