manualshive.com logo in svg

Blue Sonic Multimedia PC, User Manual, Page: 293 / 304

Share
Download
Blue Sonic Multimedia PC User Manual Download Page 293

Trusted Platform (Security) Module (Windows 7) D - 73

Windows 7

Windows 7

Infineon Security Platform Settings Tool

The Infineon Security Platform Settings Tool allows you to manage and check the TPM state, manage your pass-
word information, and to backup and restore the TPM data. As TPM is usually administered within large enter-
prises and organizations, your system administrator will need to assist you in managing the information here.

Figure D - 47

 - Infineon Security Platform Settings Tool

Menus

Note that not all the
menus pictured here will
be available for access.
The menu items that ap-
pear will be dependent on
your configuration set-
tings etc. (see the 

Help

file for full details).

Summary of Contents for Multimedia PC

















































































































































































































































































































Reviews:

No comments