manualshive.com logo in svg

Blue Sonic Multimedia PC, User Manual, Page: 278 / 304

Share
Download
Blue Sonic Multimedia PC User Manual Download Page 278

D - 58 Bluetooth & WLAN Combo Module (Windows 7)

Windows 7

Windows 7

Intel Bluetooth Combo Driver Installation

Note this driver is required only for the Intel combo Bluetooth and WLAN module
only.

1.

Before installing the driver make sure the Bluetooth module is powered 

on

 (use 

the 

On Screen Display 

button

), then insert the 

Device Drivers & Utili-

ties + User’s Manual 

disc into an attached DVD drive. If a 

Found New 

Hardware 

window appears, click/tap 

Cancel 

in all windows that appear, and 

then proceed to install the driver as below.

2.

Click/tap 

Option Drivers

 (button).

3. Click/tap 

4.Install Combo BT Driver > Yes

.

4. Click/tap 

Next >

 

Next

.

5. Click/tap the button to accept the license and click/tap 

Next

.

6. Click/tap 

Next > Finish

.

7. See 

“Standard Bluetooth Configuration in Windows 7” on page D - 59

 for 

configuration instructions.

High Speed Bluetooth 

Data Transfer

The 

Combination Wire-

less LAN & Bluetooth
module

 supports high

speed data transfer. How-
ever to achieve such
transfer speeds, 

both de-

vices must support
high speed data trans-
fer

.

To obtain high speed
data transfer make sure
that both the WLAN and
Bluetooth modules are
powered on.

Check your Bluetooth
compatible device’s doc-
umentation to confirm it
supports high speed data
transfer.

Summary of Contents for Multimedia PC

















































































































































































































































































































Reviews:

No comments