Any operation. Any asset. Anywhere. 9555 Docking Station User Guide v1.3
Page
14
of
28
© 2022 Blue Sky Network, All Rights Reserved
DOCKING YOUR 9555 HANDSET
The docking process is described below. Connections to the 9555 Handset are made at 2 locations,
and the Docking Station is designed to self-align all of its electrical connections. Care should be
taken to avoid using excess force when docking.
1)
Remove protective antenna-socket plug
Before docking your 9555 Handset,
it is imperative that you remove
and discard the rubberized
packing plug from the antenna
connector hole on the back of the
handset.
Held in by only a friction fit, use a
small screwdriver to easily remove
the plug. Failure to remove this plug
may damage the Docking Station
antenna connector.
2)
Align the Handset’s
base and connectors
Rotate the Handset lock counter-
clockwise to open. Next, place the
base of the Handset into the Docking
Station as shown. Then, rotate the
top of the phone back into the cradle.
3)
Secure the Handset using the lock
Rotate the Handset lock clockwise
until it is flush with the Docking
Station
’s
body. This will ensure the
Handset is secure and its
connections are properly mated.
The latched connection between
the Handset and the Dock is
important for satellite reception
and ensuring the Handset cannot
fall out of the Docking Station.
